Programming Assignment II: Multi-thread Programming

The purpose of this assignment is to familiarize yourself with Pthread and std::thread programming in C and C++, respectively. You will also gain experience measuring and reasoning about the performance of parallel programs (a challenging, but important, skill you will use throughout this class). This assignment involves only a small amount of programming, but a lot of analysis!

1. Part 1: Parallel Counting PI Using Pthreads

1.1 Problem Statement

This is a follow-up assignment from Assignment ZERO. You are asked to turn the serial program into a Pthreads program that uses a Monte Carlo method to estimate PI. The main thread should read in the total number of tosses and print the estimate. You may want to use long long ints for the number of hits in the circle and the number of tosses, since both may have to be very large to get a reasonable estimate of PI.

Your mission is to make the program as fast as possible. You may consider a lot of methods to improve the speed, such as SIMD intrinsics or a faster random number generator. However, you cannot break the following rules: you need to implement the Monte Carlo method using Pthreads.

Hint: You may want to use a reentrant and thread-safe random number generator.

You are allowed to use third-party libraries in this part, such as pseudorandom number generators or SIMD intrinsics.

1.2 Requirements

• Typing make in the part1 directory should build the code and create an executable called pi.out.
• pi.out takes two command-line arguments, which indicate the number of threads and the number of tosses, respectively. The value of the first and second arguments will not exceed the range of int and long long int, respectively. pi.out should work well for all legal inputs.
• pi.out should output (to stdout) the estimated PI value, which is accurate to three decimal places (i.e., 3.141xxx) with at least 1e8 tosses.

Example:

$ make && ./pi.out 8 1000000000
3.1415926....

2. Part 2: Parallel Fractal Generation Using std::thread

2.1 Problem Statement

$ cd <your_workplace>
$ wget https://nctu-sslab.github.io/PP-s21/HW2/HW2_part2.zip
$ unzip HW2_part2.zip -d part2

Build and run the code in the part2 directory of the code base. (Type make to build, and ./mandelbrot to run it. ./mandelbrot --help displays the usage information.)

This program produces the image file mandelbrot-serial.ppm, which is a visualization of a famous set of complex numbers called the Mandelbrot set. [Most platforms have a .ppm viewer. For example, to view the resulting images, use tiv command (already installed) to display them on the terminal.]

As you can see in the images below, the result is a familiar and beautiful fractal. Each pixel in the image corresponds to a value in the complex plane, and the brightness of each pixel is proportional to the computational cost of determining whether the value is contained in the Mandelbrot set. To get image 2, use the command option --view 2. (See function mandelbrotSerial() defined in mandelbrotSerial.cpp). You can learn more about the definition of the Mandelbrot set.

Your job is to parallelize the computation of the images using std::thread. Starter code that spawns one additional thread is provided in the function mandelbrotThread() located in mandelbrotThread.cpp. In this function, the main application thread creates another additional thread using the constructor std::thread (function, args…). It waits for this thread to complete by calling join on the thread object.

Currently the launched thread does not do any computation and returns immediately. You should add code to workerThreadStart function to accomplish this task. You will not need to make use of any other std::thread API calls in this assignment.

2.2 Requirements

You don’t need to write a report for the following questions, which are marked with “Q1-Q4”, but these questions do help you figure out how to write the code for Part two.

1. Modify the starter code to parallelize the Mandelbrot generation using two processors. Specifically, compute the top half of the image in thread 0, and the bottom half of the image in thread 1. This type of problem decomposition is referred to as spatial decomposition since different spatial regions of the image are computed by different processors.
2. Extend your code to use 2, 3, 4 threads, partitioning the image generation work accordingly (threads should get blocks of the image). Q1: In your write-up, produce a graph of speedup compared to the reference sequential implementation as a function of the number of threads used FOR VIEW 1. Is speedup linear in the number of threads used? In your writeup hypothesize why this is (or is not) the case? (You may also wish to produce a graph for VIEW 2 to help you come up with a good answer. Hint: take a careful look at the three-thread data-point.)
3. To confirm (or disprove) your hypothesis, measure the amount of time each thread requires to complete its work by inserting timing code at the beginning and end of workerThreadStart(). Q2: How do your measurements explain the speedup graph you previously created?
4. Modify the mapping of work to threads to achieve to improve speedup to at about 3-4x on both views of the Mandelbrot set (if you’re above 3.5x that’s fine, don’t sweat it). You may not use any synchronization between threads in your solution. We are expecting you to come up with a single work decomposition policy that will work well for all thread counts—hard coding a solution specific to each configuration is not allowed! (Hint: There is a very simple static assignment that will achieve this goal, and no communication/synchronization among threads is necessary.). Q3: In your write-up, describe your approach to parallelization and report the final 4-thread speedup obtained.
5. Q4: Now run your improved code with eight threads. Is performance noticeably greater than when running with four threads? Why or why not? (Notice that the workstation server provides 4 cores 4 threads.)

3. Grading Policy

NO CHEATING!! You will receive no credit if you are found cheating. Don’t take any chances. 😉

Total of 100%:

• Part 1 (50%):
  • Correctness (40%): The requirements should be met, and your parallelized program should run faster than the original (serial) program. We will evaluate your program with 2, 3, 4 or more threads. Your program is expected to be scalable. Notice that you will receive no credit if one of the two aforementioned conditions fails.
  • Performance (60%): Get all points if the running time of $ time (./pi.out 3 100000000; ./pi.out 4 100000000) on the workstation is less than 1.00 second.
• Part 2 (50%):
  • Correctness (40%): Your parallelized program should pass the verification (written in main.cpp) and run faster than the original (serial) program. Notice that you are not allowed to modify files other than mandelbrotThread.cpp and you will receive no credit if one of the two aforementioned conditions fails.
  • Performance (60%): Get all points if the running time of $./mandelbrot -t 3 along with $./mandelbrot -t 4 on the workstation is less than 0.375 second. (Only the multi-thread part is considered.)

4. Evaluation Platform

Your program should be able to run on UNIX-like OS platforms. We will evaluate your programs on the workstations dedicated for this course. You can access these workstations by ssh with the following information.

The workstations are based on Ubuntu 18.04 with Intel(R) Core(TM) i5-7500 CPU @ 3.40GHz processors. g++-10 and clang++-11 have been installed.

Login example:

$ ssh <student_id>@140.113.215.195 -p <port>

5. Submission

All your files should be organized in the following hierarchy and zipped into a .zip file, named HW2_xxxxxxx.zip, where xxxxxxx is your student ID.

Directory structure inside the zipped file:

• HW2_xxxxxxx.zip (root)
  • part1 (directory)
    • Makefile
    • pi.c or pi.cpp
    • other C/C++ files
  • part2 (directory)
    • mandelbrotThread.cpp

$ zip HW2_xxxxxxx.zip -r part1 part2

Notice that the part2 should only include mandelbrotThread.cpp. Any other files will be ignore.

You can use the testing script to check your answer and see the score you will likely to receive. TA will use the same script to grade your assignment. Run test_hw2 in a dictionary that contains your HW2_XXXXXXX.zip file.

$ test_hw2

Please make sure you pass the testing script and then upload your zipped file to new E3 e-Campus system by the due date.

You will get NO POINT if your ZIP’s name is wrong or the ZIP hierarchy is incorrect.

Due Date: 2021/04/07 23:59

6. References

There are some some resources for you:

• POSIX Threads Programming
• 簡易 Pthreads 平行化範例與效能分析
• 深入理解 Reentrancy 和 Thread-safe